« static audio adjustment in vdub | Main | dvds, part 3 »
September 3, 2005
too loud
radix pointed out some audio overpeaking in the capture of sparky's new metroid prime frigate escape record. turns out that my jvc hr-s9911u (the "uber" vcr) has all kinds of controls, but not a playback volume control. therefore, it was necessary to connect an old sony receiver between the full frame tbc (datavideo tbc-1000) and the all in wonder. i'm not happy with this solution, because the audio has to go through two adapters to get back to rca and to the card (i had to use the receiver's headphone port to be able to control the output volume), but it will work for now. the problem is not actually with the aiw, but with my capture machine's crappy built in sound hardware (the lowest recording level for the line in is too high).
looking forward to trying out the tbc with a pal tape soon (as i don't have a built-in tbc on my pal vcr).
Posted by njahnke at September 3, 2005 4:04 PM
Comments
Post a comment
Thanks for signing in, . Now you can comment. (sign out)
(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)